Bobbins & Flyer Units

Louet Regular Bobbin

All Regular Bobbins, 3 ratios (5:5:1, 7:5:1,10:5:1)

Weight: 0.80 lbs

Louet High Speed Bobbin

3 ratios (6:5:1, 9:5:1,15:0:1)

1.330
Weight: 0.80 lbs

Louet Bulky Bobbin

3 ratios (6:2:1, 5:1,4:2:1)

1.312
Weight: 1.00 lbs

Louet Fatcore Bobbin

For easier fine spinning and easier for beginners

1.390
Weight: 0.80 lbs

Louet High Speed Spinning Set

3 Fatcore Bobbins, 1 High Speed Flyer & 1 Drive Band

1.300
Weight: 3.00 lbs

Louet Narrow Flyer

Narrow Flyer – comes standard with all wheels Narrow flyers are 4” wide inside. Wheel models S15, S17 and S75 will come with flyers that have stationary hooks. All other wheels will come with flyers that have sliding hooks; same as the High Speed Flyer.

1.502
Weight: 2.00 lbs

Louet Wide Flyer

Wide Flyer – shown to the left, this flyer is required to operate the bulky bobbin. It is 5” wide inside. This flyer is required if you are using bulky bobbins.

1.500
Weight: 2.00 lbs

Louet Highspeed Flyer

High-Speed Flyer - The high speed flyer comes with a sliding hook to allow for fine adjustments of hook position. It is 4" wide inside and has a 3/8" orifice.

1.575
Weight: 2.00 lbs

Victoria High Speed Spinning Set (oak)

1.302
Weight: 0.70 lbs

Victoria/Julia High Speed Spinning Set (beech)

This high speed set for the Victoria contains a flyer, 3 bobbins, a small whorl (you have to add this to the existing whorl) and a hook for threading the yarn through the orifice and the flyer hole. The image is of the beech set, but in the oak set the flyer disc and the hook handle are oak. The orifice is 5 mm, but you can take out the inserts and have an 8 or 12 mm orifice. Ratio's are 1:20 and 1:30.

1.301
Weight: 1.00 lbs